Y15 vs 1215
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
Y15
Carbon Steel
Y15 is the higher-carbon companion of Y12 in China’s sulfur-phosphorus free-cutting family (GB/T 8731): the same low-silicon, high-sulfur, high-phosphorus concept with carbon raised to 0.10–0.18% and manganese to 0.80–1.20% for somewhat better strength.
Standards: AISI 1215 (near) · JIS SUM family (near) · GB Y15 (GB/T 8731)
1215
Carbon Steel
1215 is a rephosphorized and resulfurized free-cutting steel with very low carbon, built purely for machining speed. It is one of the fastest-cutting bar steels available and a staple of high-volume screw machining.
Standards: AISI 1215 · JIS SUM25 (near) · GB Y12 (near)
Chemical composition compared (%)
| Element | Y15 | 1215 |
|---|---|---|
| C | 0.10–0.18 | ≤0.09 |
| Si | ≤0.15 | — |
| Mn | 0.80–1.20 | 0.75–1.05 |
| P | 0.08–0.15 | 0.04–0.09 |
| S | 0.23–0.33 | 0.26–0.35 |
Properties compared
| Property | Y15 | 1215 |
|---|---|---|
| Tensile strength | 410–530 MPa (hot rolled, typ.) | 380–460 MPa (hot rolled, typ.) |
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
| Machinability | — | ≈135% of 1212 (typ. rating) |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: Y15 · 1215. Substitution decisions for certified parts stay with the design authority.