1008 vs 1010
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
1008
Carbon Steel
1008 is a very low carbon steel with excellent cold formability and weldability. It is the standard grade for cold-headed fasteners, wire products and deep-drawn parts where strength demands are minimal.
Standards: DIN C8 (near) · AISI 1008 · JIS S09CK (near) · GB 08 (near)
1010
Carbon Steel
1010 is a low carbon steel for lightly loaded parts that need good formability, weldability and an optional carburized case. It is widely stocked as cold drawn bar for machined components.
Standards: DIN 1.0301 (C10) · AISI 1010 · JIS S10C · GB 10
Chemical composition compared (%)
| Element | 1008 | 1010 |
|---|---|---|
| C | ≤0.10 | 0.08–0.13 |
| Mn | 0.30–0.50 | 0.30–0.60 |
| P | ≤0.040 | ≤0.040 |
| S | ≤0.050 | ≤0.050 |
Properties compared
| Property | 1008 | 1010 |
|---|---|---|
| Tensile strength | 300–380 MPa (hot rolled, typ.) | 320–400 MPa (hot rolled, typ.) |
| Yield strength | ≥170 MPa (typ.) | — |
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
| Weldability | Excellent | Excellent |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: 1008 · 1010. Substitution decisions for certified parts stay with the design authority.