439 vs 430
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
439
Stainless Steel
439 is a stabilised 17–19% chromium ferritic stainless with low carbon and nitrogen, giving better formability, weldability and corrosion resistance than 430. It is used for exhaust systems and heat-exchanger tubing as a lower-cost alternative to 304.
Standards: DIN 1.4510 · AISI 439 · GB 06Cr17Ti
430
Stainless Steel
430 is the most widely used ferritic stainless steel, a 17% chromium, nickel-free grade with good corrosion resistance in mild atmospheres and excellent resistance to nitric acid. It is the standard grade for appliance trim and decorative sheet.
Standards: DIN 1.4016 · AISI 430 · JIS SUS430 · GB 10Cr17
Chemical composition compared (%)
| Element | 439 | 430 |
|---|---|---|
| C | ≤0.03 | ≤0.12 |
| Si | ≤1.00 | ≤1.00 |
| Mn | ≤1.00 | ≤1.00 |
| P | ≤0.040 | ≤0.040 |
| S | ≤0.030 | ≤0.030 |
| Cr | 17.00–19.00 | 16.00–18.00 |
| Ni | ≤0.50 | ≤0.75 |
| Ti | 0.20+4×(C+N)–1.10 | — |
| N | ≤0.03 | — |
Properties compared
| Property | 439 | 430 |
|---|---|---|
| Delivery condition | Annealed | Annealed |
| Hardness | ≤183 HB (annealed) | ≤183 HB (annealed) |
| Tensile strength | 415–585 MPa | 450–600 MPa |
| Density | 7.70 g/cm³ | 7.70 g/cm³ |
| Magnetic | Yes | Yes |
| Yield strength | — | ≥205 MPa |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: 439 · 430. Substitution decisions for certified parts stay with the design authority.