9260 vs 60Si2Mn
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
9260
Alloy & Engineering Steel
9260 is a silicon-manganese spring steel with about 2% silicon, giving an exceptionally high yield-to-tensile ratio and resistance to permanent set (sag). It is a mainstream coil spring steel for vehicle suspensions.
Standards: DIN 1.5028 (65Si7 family, near) · AISI 9260 · JIS SUP6 (near) · GB 60Si2Mn (near)
60Si2Mn
Alloy & Engineering Steel
60Si2Mn is China’s standard silicon-manganese spring steel (GB/T 1222), produced in very large tonnage for vehicle and machinery springs. Its high silicon gives the same high elastic limit that makes SAE 9260 popular, at commodity-steel cost.
Standards: DIN 1.5028 (65Si7, near) · AISI 9260 (near) · JIS SUP6 (near) · GB 60Si2Mn (GB/T 1222)
Chemical composition compared (%)
| Element | 9260 | 60Si2Mn |
|---|---|---|
| C | 0.56–0.64 | 0.56–0.64 |
| Si | 1.80–2.20 | 1.50–2.00 |
| Mn | 0.75–1.00 | 0.60–0.90 |
| P | ≤0.035 | ≤0.035 |
| S | ≤0.040 | ≤0.035 |
| Cr | — | ≤0.35 |
Properties compared
| Property | 9260 | 60Si2Mn |
|---|---|---|
| Hardness (spring temper) | 40–50 HRC typical | — |
| Tensile strength | 1300–1600 MPa (Q&T spring temper, typ.) | ≥1275 MPa (Q&T, GB/T 1222 reference) |
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
| Yield strength | — | ≥1175 MPa (Q&T, GB/T 1222 reference) |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: 9260 · 60Si2Mn. Substitution decisions for certified parts stay with the design authority.