M36 vs M35
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
M36
Tool Steel
M36 applies the 8% cobalt treatment to the M2 base composition, giving red hardness close to M42 with a slightly different carbide balance. It is an older American cobalt grade still specified for heavy cutting tools.
Standards: AISI M36 · GB W6Mo5Cr4V2Co8 (near)
M35
Tool Steel
M35 is M2 with about 5% cobalt added, the most popular cobalt high-speed steel worldwide. The cobalt raises red hardness so tools keep cutting at the higher speeds and feeds used on stainless and alloy steels.
Standards: DIN 1.3243 · AISI M35 · JIS SKH55 · GB W6Mo5Cr4V2Co5
Chemical composition compared (%)
| Element | M36 | M35 |
|---|---|---|
| C | 0.80–0.90 | 0.87–0.95 |
| Si | ≤0.45 | ≤0.45 |
| Mn | ≤0.40 | ≤0.40 |
| Cr | 3.75–4.50 | 3.75–4.50 |
| Mo | 4.50–5.50 | 4.70–5.20 |
| W | 5.50–6.50 | 5.90–6.70 |
| V | 1.75–2.25 | 1.70–2.10 |
| Co | 7.75–8.75 | 4.50–5.00 |
Properties compared
| Property | M36 | M35 |
|---|---|---|
| Delivery condition | Annealed | Annealed |
| Hardness (hardened) | 63–66 HRC | 63–66 HRC |
| Density | 8.10 g/cm³ | 8.10 g/cm³ |
| Red hardness | High (8% cobalt) | Higher than M2 (5% cobalt) |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: M36 · M35. Substitution decisions for certified parts stay with the design authority.