A217 WC6 vs A387 Gr.11
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
A217 WC6
Structural & HSLA Steel
ASTM A217 WC6 is the 1.25Cr-0.5Mo cast steel for high-temperature pressure castings — the cast counterpart of A387 Gr.11 plate and F11 forgings, standard for steam-service valve bodies and turbine castings to about 540 °C.
Standards: DIN GX15CrMo5 (EN 10213, near) · AISI A217 WC6 · JIS SCPH21 (near) · GB ZG15Cr1Mo (near)
A387 Gr.11
Structural & HSLA Steel
ASTM A387 Grade 11 is the 1.25Cr-0.5Mo pressure-vessel plate for elevated-temperature service in refineries and petrochemical plant. Class 2 is the higher-strength, tempered condition normally specified for reactors and separators.
Standards: DIN 13CrMo4-5 (near) · AISI A387 Gr.11 Cl.2 · JIS SCMV3 (near) · GB 15CrMoR (near)
Chemical composition compared (%)
| Element | A217 WC6 | A387 Gr.11 |
|---|---|---|
| C | 0.05–0.20 | 0.05–0.17 |
| Si | ≤0.60 | 0.50–0.80 |
| Mn | 0.50–0.80 | 0.40–0.65 |
| P | ≤0.035 | ≤0.025 |
| S | ≤0.035 | ≤0.025 |
| Cr | 1.00–1.50 | 1.00–1.50 |
| Mo | 0.44–0.65 | 0.45–0.65 |
Properties compared
| Property | A217 WC6 | A387 Gr.11 |
|---|---|---|
| Tensile strength | 485–655 MPa | 515–690 MPa (Class 2) |
| Yield strength | ≥275 MPa | ≥310 MPa (Class 2) |
| Elongation | ≥20% | — |
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: A217 WC6 · A387 Gr.11. Substitution decisions for certified parts stay with the design authority.