1215 vs 1117
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
1215
Carbon Steel
1215 is a rephosphorized and resulfurized free-cutting steel with very low carbon, built purely for machining speed. It is one of the fastest-cutting bar steels available and a staple of high-volume screw machining.
Standards: AISI 1215 · JIS SUM25 (near) · GB Y12 (near)
1117
Carbon Steel
1117 is a resulfurized free-machining steel: added sulfur and high manganese give fast, clean cutting while keeping enough carbon to carburize. It is a standard screw-machine grade for small turned parts in volume.
Standards: AISI 1117 · JIS SUM family (near) · GB Y15 (near)
Chemical composition compared (%)
| Element | 1215 | 1117 |
|---|---|---|
| C | ≤0.09 | 0.14–0.20 |
| Mn | 0.75–1.05 | 1.00–1.30 |
| P | 0.04–0.09 | ≤0.040 |
| S | 0.26–0.35 | 0.08–0.13 |
Properties compared
| Property | 1215 | 1117 |
|---|---|---|
| Tensile strength | 380–460 MPa (hot rolled, typ.) | 400–480 MPa (hot rolled, typ.) |
| Machinability | ≈135% of 1212 (typ. rating) | ≈90% of 1212 (typ. rating) |
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: 1215 · 1117. Substitution decisions for certified parts stay with the design authority.